Installation

An in-depth guide to install VereTech RCE Bot.

Adding Your GPORTAL Gameserver

Greetings and welcome to the in initiation of your gaming journey with VereTech – the ultimate killfeed Discord bot. In this segment, we will guide you through the process of integrating the VereTech RCE Bot into your GPORTAL Gameserver via Discord.

To establish a connection you will need to navigate over to https://www.g-portal.com/ and sign in. Once you have successfully signed in you will need to locate the server you wish to install on and select it. 

Once selected you will notice that there will be a tab to the left of your screen named “Permissions” as seen on the image below;

permiss.png

Once you have clicked the permissions tab you will see the option to “Add User” please click on this button and then enter the following username. 

de91e108-fd4e-423a-acc3-7ab55926b90c

It is important that this is absolutely correct, including any and all hyphens.

Before we leave the G-Portal page there are 2 very important pieces of information we need to make a log of.

  1. Server ID
  2. Region

Both of these can be located in the URL at the top of your screen, these pieces of information are critical in the setup so please make a note of them. Below is an example image to show you what we need:

serverid.png

Please Note: DO NOT copy the information in the image, you need to obtain your own ID's

INT or EU? You will notice that our Region is INT in the first highlighted code and then the 2nd is the Server ID. (Do not use the example)

There are currently only 2 that it could be,

Region Short Code URL Code
USA Us int
European EU eur

It is likely that you will know this, however, if you are unsure then please refer to the URL as seen above.

Now we have successfully completed everything on G-Portal side it’s time to head over to Discord.

Time to invite the bot! Please navigate to VereTech discord (https://discord.gg/veretech) and find the bot in the “Online” section on screen and click on it. You will see a button stating [+Add App] please use this and select which Discord Server you wish to add it to, alternatively please CLICK HERE for an instant bot invite link. 

Creating the Connection

Now that we have the bot available in our Discord, we need to give it the credentials. 

For the next part you will have to complete your Discord Permissions, you can do so by clicking the blue text.

For this we will need the information we gathered from G-Portal earlier. To do this please use the command /gs add-gp. Once triggered this command is going to give you 3 options, all of which are mandatory for connection;

Once you have filled in these options, you will be shown that a connection has been made, and to please allow 5 minutes for the connection to complete.

Your bot can be tested for connection on the coming pages.

Your Next Step is to Enable your Game Feeds, Head over to Discord Configuration to get started.

Adding Your Nitrado Gameserver

Greetings and welcome to the in initiation of your gaming journey with VereTech – the ultimate killfeed Discord bot. In this segment, we will guide you through the process of integrating the VereTech RCE Bot into your Nitrado Gameserver.

To establish a connection you will need to create an account on our website, available at https://rce.veretech.systems.

Steps Overview:
- Create an Account
- Link External Providers to your new VT account.
- Add your Gameserver.
- - Choose the Discord Guild
- - Choose the hosting provider "Nitrado"
- - Choose the gameserver you want to install.
- - Rename gameserver and confirm.

To get started, first click "Sign In" on the homepage:

image.png

You may either create your account by signing in with an external provider like Discord or Nitrado, or create a username + password and later connect Discord and Nitrado to your account.

image.png

Each provider has a unique way of signing you in, please follow the steps accordingly.

I choose to login via Discord, lets follow the steps to know link Nitrado to our newly created VT account.
Navigate to "Manage Account"

image.png


Now navigate to "External Logins", and click on "Nitrado"

image.png
You will be taken to Nitrado's website where you can continue to login with your Nitrado account.

Once you have logged in, Nitrado will ask if you wish to provide VereTech RCE Bot access to your account. You may decline this, but please understand we cannot connect to your gameserver without it.

image.png

You should now see that you have linked both your Discord and Nitrado accounts to your VT account, if you do, you can proceed to your "Dashboard".

image.png

On the left hand side drawer bar (on mobile you may need to click on ), there is an "Active Server" dropdown, which will contain a button "Add New Gameserver"

image.png

Select the Discord Guild you wish to install the gameserver into, then click Next.

image.png


Select the hosting provider "Nitrado", then click Next.

image.png

Now select the Gameserver from the list that you want to install, then click Next.


image.png

Now you have the opportunity to rename the gameserver, this does not rename how your gameserver is displayed in game, only how the Gameserver is displayed when using our services. Then click "Begin Install".

image.png

If all went well, you should see the below message in the top right of your screen:

image.png

Your bot can be tested for connection on the coming pages.

Your Next Step is to Enable your Game Feeds, Head over to Discord Configuration to get started.

Updating your GameServer



Updating your server could be needed for a number of reasons, including, but not limited to, Changing Server Nickname, Changing GameServer, changing credentials following Hardware Update.

To do this is pretty simple and is done using the command below...

/gs update-gp

image.png

You will be greeted with the image above where you will need to select with GameServer to update, once selected, you have 4 options, you may select as many of these as required. Selecting “nickname” will change the name of your GameServer stored within the bot, this is fully customizable. If you have received new Hardware or have purchased a new server then you will need to
select both “gameserverid” and “region” to update the GameServer as required. Once you have entered the credentials, hit send and the settings will be applied. 

The "show-on-website" parameter allows you to toggle if your GameServer is visible @ https://rce.veretech.systems/servers

To know what your current settings are, you can run /gs test

Using this command will force a reconnection to your Gameserver. This can take 3-5 Minutes for the bot to reconnect to your Gameserver

Testing your Connection

In the event your bot is unresponsive or not working as intended then we recommend that you run a connection test to ensure its connection is there and stable. You can do this by using the command /gs test. In doing this you will be given the option on which GameServer to test as shown below;

gstest.png

Once you choose your GameServer and hit send you will receive a response of either success or an error message, both are displayed below to see what you are looking for.

gs-test-yes.pnggs-test-no.png

The left image represents a successful connection and you may proceed using your bot as normal. The right image represents a failed connection, this could be due to a number of things including outdated server credentials, please ensure that the information is correct and that you have not incorrectly spelt or incorrectly entered any credentials. If your credentials are all OK then please refer to the VereTech Discord for assistance.

You can open a ticket in Discord by clicking here.

VereTech Premium

Purchasing Premium

If you are considering using the premium features of the bot. Firstly... Thank you! When activating premium you will gain the following benefits;

premi.png

Noticeable Changes -

Premium can be activated by using the command /premium activate, by using this command you will be asked which server you want to activate premium on. Once you select it the bot will respond with a message with your personalized Stripe link as shown below;

stripe.png

Stripe is our payment provider who accepts payments from quite a number of methods depending on your region. Please click the link to learn more:    

Stripe - Payment Methods: https://docs.stripe.com/payments/payment-methods/overview


Once payment has been approved, it can take up to 30 minutes for premium to activate. 

Premium Status


Following your purchase of Premium you also have the ability to test it within the bot to see if you subscription is now active.
To test the status of your premium, you can do this by using the command /premium status. Once you do this inside your discord you will get the following options;

premistats].png

Please select your GameServer and hit enter. The bot will then think for a moment whist it gathers your premium information. Once it has obtained the info you will be greeted with one of the following messages;

                                              premi-yes.png

This response shows you that Premium is active with all of your important dates, the next bill cost and your cancellation details.

                                   premi-no.png

This response shows either Premium is not active, or, it is not active yet following a successful payment, please check back again in a moment if you have made a payment.


Coupons

VereTech periodically offer coupons for various reasons, including but not limited to; Orders for 3 or more premium servers, Reaching Discord Milestones, Celebration Moments and much more. If there are coupons available then you need you have 2 options, in the image below you can see that the checkout offers a coupon code option, this is for people buying premium for the first time via their personal Stripe link who have a coupon code;

                                          couponstripe.png

Coupons that need to be applied to an existing premium subscription can be done so by using a command in discord, that command is /premium coupon;

coupondiscord.png

Once sending this command you will be given the following options;


Transferring your Premium

If you have multiple GameServers or you have decided that you would like to purchase a new one and simply transfer your premium, you can transfer over without losing any if your configurations. You can do so by using the command;
/premium switch, in doing so you will be greeted with the following options;

   premiswitch.png
Here you will need to select which GameServer you want to remove premium from and secondly choosing which GameServer you want to move the premium license to and simply hit enter.

Please note: The new GameServer will have to have an active connection to the bot for it to recognize and give you the [to] option.



Cancelling Your Premium

If you have an active subscription to premium and wish to cancel it for whatever reason then all you need to do is use the command /premium cancel If you have multiple servers then this will need to be repeated for each GameServer which you have an active premium subscription on.

premicancel.png


BuymeCoffee (Donations)

As you know we offer a vast amount of our services absolutely free of charge, our dedication to continually offer 70% of the bot for free does sometimes rely on your generosity, although it is never expected yet always appreciated.... If you wish to help towards the cause then please use the command /premium buymecoffee where you will receive a response from the bot with a donation link to our Stripe account.


buymecoffee.png

Deleting your GameServer

Should you no longer want or require the VereTech RCE bot, or are dissatisfied with it then removing it is a pretty simple process.

Please Note: If you are a PREMIUM user, you must cancel your premium first before following the steps below using the command /premium cancel, for more information on this please click here

Using the command /gs delete you can remove the GameServer at the click of a button below you will see the command as it appears on screen;

gsdelete.png

You will be greeted with the drop down showing all of your connected servers, please select as appropriate to delete the server, if you have multiple then you will need to repeat this process.

Once you have done the above steps, now simply “Kick” the bot from your Discord

Finally please remember to head over to GPortal at https://www.g-portal.com to remove the VereTech bot from the permissions of your GPortal Gameserver.